The Bush Winch: It Can Always Help Your Car Get Out of Difficult Situations! (Video)



  1. Firstly, replace your vehicles wheel nuts and or bolts, whichever is the case for your vehicle,with those supplied the Bush Winch. These wheel nuts/bolts have a slot cut into the head which the Bush Winch attaches to. Once they are on leave the nuts/bolts on your vehicle so that the Bush Winch can be attached at any later time.
  2. A simple push and twist of the Bush Winch onto the wheel nuts/bolts is all you need to attach.  A reverse twist and pull is all you need to unattach.
  3. Two winch drums and two winch ropes are standard in the Bush Winch kit and you can chose to attach one or both to the front or back axle to winch forward or backwards as you chose.
  4. The winch ropes are taken from the winches to anchor points either in front or behind the vehicle depending on whether you want to winch forwards or backwards
  5. Engage forward or reverse gear and drive and the winch rope will wind onto the winch drum as the wheel spins forcing the vehicle along. For more detailed information, check out our Winch Manual. 


Leave a Reply

© 2022 Home Design, Garden & Architecture Blog Magazine. All rights reserved.